SBS waterproofing membrane is a common one among many waterproofing materials, and Panjin waterproofing membrane is also very good in waterproof effect. To have a good waterproof effect, construction quality is also very important, so how should SBS waterproofing membrane be cold-bonded? Let's take a look together below.

Panjin waterproof membrane

1. Brush a layer of petroleum and treatment agent on the grassroots level.

2. After the base layer is dry, apply the adhesive again and evenly coat it.

3. Place the SBS waterproof membrane in the predetermined position, and then pave it.

4. Use an adhesive to stick it flat, and then use a pressure roller to compact the coil after it has dried.

5. If double-layer waterproofing is required, the longitudinal seams between the second layer and the first layer should be staggered by one third, and the transverse seams should be staggered by more than one meter.

Through the above introduction, I believe that everyone has a better understanding of the cold bonding method of SBS waterproof membrane.